锂离子电池作为一种新型高能化学电源,具有高容量、高功率、寿命长、小型化、薄型化和无污染的特点。
其优越性能正逐步被人们所认识,它的应用领域正在迅速扩大。
为了最大限度发挥锂电池的性能,充分保证使用寿命,必须使用先进的电池管理系统。
电池管理系统能够监控电池单元的电压/电流与温度,监控由多个电池单元串联而成的电池组的电压与电流,平衡电池单元之间的电压,并可组网传输数据信号,确保电池在充放电时高效、安全地工作,延长电池的使用时间。中印基于本身的技术积累,推出了一整套锂离子电池管理解决方案。
中印的电池管理解决方案是围绕一个电池管理IC构建的
该方案在一个封装中提供低功耗MCU和高性能模拟前端(AFE),提供开发工具来支持开发安全可靠和高性能的锂离子电池管理系统。
适用范围从基础的消费级应用,如笔记本电脑,电动工具,无绳吸尘器,电动摩托车,助力自行车等,以及通信基站、电动汽车、光伏备用电源、军事装备及矿产开采等工业应用都有应用案例。
安全控制:具有多种故障安全检测功能,可实现电池组高安全性
集成的MCU和AFE内置的自诊断功能。
超低功耗存储模式
过压/欠压保护
过电流
温度过高/过低保护
故障期间的FET控制
保险丝熔断
容量计算:连续高精度电池电量检测
针对电流,电压和温度测量进行了优化的Δ-Σ模数转换器。
动态调整剩余电量计算以应对老化和退化的电池。
内置学习能力计算
电流和电压校准功能
电池历史记录保存功能
全面的开发环境:
带有EVB的入门工具包、示例代码和用户手册,便于评估和更快的开发
评价板:对设备性能和运行行为进行评价;包括E1连接器,便于芯片调试。
示例代码:可用的示例程序源代码的所有基本电池管理功能。
通过12C总线与PC机通信
GUI I/F显示电池参数状态,如电压,电流和温度
中印专注于工业和消费产品的电池管理系统。并且拥有强大的安全、可靠性和灵活的技术解决方案。
高精度A/D转换器,剩余容量算法,安全技术,F/W定制等。
高集成解决方案
配套的模拟前端(AFE)和MCU
小尺寸包装
很少的外部元件
超低功率
扩展的功能集
从1格到10格
高精度的电压、电流和温度测量
外接HS FET开关控制
电池调节
过电流保护
系统电源
评估工具
准备使用HW
标准FW可用
样例软件包
高电池计数锂离子电池管理模拟前端
超低功率模式
支持电池组热插拔设计
高精度电压测量集成调节器
可调整的外部电路
▪RL78 CPU core
▪ Memory:
− On-chip RAM : 7kB
− Code flash memory : 128 KB / Block size : 1KB
− Data flash memory : 4 KB
▪ On-chip debug function
▪ Self-programming (with boot swap function/flash shield window function)
▪ High-speed on-chip oscillator: up to 32MHZ, +/- 1.0% (TA = -20 to +85C)
▪ Subsystem clock: 32.768kHz
▪ Power management and reset function
− On-chip power-on-reset (POR) circuit
− On-chip voltage detector (LVD)
▪ Data transfer controller (DTC)
▪ Serial interfaces
− CSI : 2 channels − UART : 2channels
− Simplified I2C : 2channels
− I2C : 1channel
− Can interface (RS-CAN lite) : 1channel
▪ Timer
− 16-bit timer : 6 channels
− 12-bit interval timer : 1channel
− Real-time clock : 1channel (calendar for 99 years, alarm function and clock correction function)
− Watchdog timer : 1 channel (operate with the dedicated low-speed on-chip oscillator)
▪ A/D converter
− 8/10-bit resolution A/D converter with 4 channels & Internal reference voltage (1.45V) and temperature sensor
▪ - I/O port: 31
▪ Sigma-delta A/D converter (AFE)
− 15-bit resolution sigma-delta A/D converter
− Input voltage range (during cell voltage-measurement) : -0.1V to 5V
− Measurement accuracy (during cell voltage-measurement) : +/- 10mV/cell
− Input channel :
− Battery Cell voltage (Cell 1 to 8 in RAJ240090, Cell 1 to 10 in RAJ240100)
− Battery Cell total voltage (VIN8 pin in RAJ240090, VIN10 pin in RAJ240100)
− Charge voltage (PACK pin)
− PON pin input voltage
− Thermistor sensor port with on-chip pull-up 10kohm resistor: 3 channels
▪ On-chip simple temperature sensor (temperature range: -20 to 85C)
▪ Internal reference and supply voltage (MCU and AFE)
▪ Current integration circuit
− 18-bit resolution sigma-delta A/D converter
− Dual Input voltage range : -100mV to 100mV or -200mV to 200mV
− Measurement accuracy : +/- 50uV (at -100mV to 100mV range select)
▪ Over current detection circuit
▪ Short circuit current detection:
− Detection voltage range 1: 25mV to 200mV (12.5mV step)
− Detection voltage range 2: 200mV to 300mV (25.0mV step)
− Detection time setting range: 0 to 915us (61us step)
▪ Charge overcurrent detection: − 2 detection range: 0-60mV/ 60-120mV − Programmable blanking time: 0 to 15.6ms
▪ Discharge overcurrent detection
− 2 detection range: 15-100mV/ 100-200mV
− Programmable blanking time: 0.488ms to 32000ms
▪ Discharge wake up current detection
− Detection voltage range: 0.25mV to 70mV
− Detection time setting range: 3.91ms to 62.5ms (3.91ms step)
▪ Charge wake up current detection
− Detection voltage range: -0.25mV to -70mV
− Detection time setting range: 3.91ms to 62.5ms (3.91ms step)
▪ AFE on-chip oscillator: 4.194MHz and 131.072KHz
▪ Timers <